Operating, Starting travel, Changing travel direction – SkyTrak 10054 Operation Manual User Manual
Page 70: Stop the vehicle by applying the service brakes, Operation
68
Model 10054
Rev. 11/03
Operation
Starting Travel
1. Enter the operator cab, fasten the seat belt, start the engine, apply
the service brake pedal and disengage the parking brake switch.
2. Rotate the twist grip of the range select lever (1) to 1st gear.
3. Move the travel select lever (2) to (F) FORWARD to travel in a for-
ward direction or to (R) REVERSE to travel backward.
4. Slowly remove your foot from the service brake pedal and press the
accelerator pedal to start travel.
IMPORTANT! Check for warning lights frequently during operation. Any
abnormal indication should be corrected as soon as practical.
Changing Travel Direction
1. Stop the vehicle by applying the service brakes.
2. Grasp the travel select lever, pull it toward the steering wheel, then
move the lever up or down in the opposite direction;
(R) REVERSE or (F) FORWARD.
Operating
OH3270
1
OH3260
2