SkyTrak 10054 Operation Manual - Manual (Page 68)

66 Model 10054 Rev. 11/03
Operation
Understanding the Boom/Outrigger Interlock System
The ultimate purpose of this interlock system is to add an extra measure of
stability allowing the boom to be extended to its maximum limits. There are
two modes to this interlock, the Extend Interlock and the Outrigger Interlock.
Extend Interlock Mode
The Extend Interlock Mode, limits boom extension (1) to a point after letter
"E" has appeared on the side of the boom and before letter "F" appears. A
sensor in the boom will automatically STOP the boom from extending past
this point until the outriggers have been lowered onto firm terrain.
With the OUTRIGGERS RAISED (2) and the boom inside of the extension
limit (1) the vehicle will function normally. The Stabil-TRAK system should
perform as designed.
Outrigger Interlock Mode
The Outrigger Interlock Mode, allows for full boom extension (3) only as
long as both outriggers (4) have been lowered onto firm terrain
(OUTRIGGERS DOWN). Once this condition is met, the boom is allowed to
extend to its full limits.
H
G
F
E
D
C
B
A
OH0633
1
2