SkyTrak 10054 Operation Manual - Manual (Page 164)

162 Model 10054 Rev. 11/03
General Maintenance
3. Measure the sag (1) in the intermediate boom extend chains (2)
between the bottom of the chains and the top of the primary inter-
mediate boom (3) at their closest point. Acceptable intermediate
boom chain sag is between 1.5" (38 mm) and 2.5" (64 mm). If the
measurement is less than 1.5" (38 mm) or more than 2.5" (64 mm),
the boom chains need to be adjusted.
Before making any adjustments to the intermediate boom extend chains,
check the following measurement at the rear of the boom.
4. Start the vehicle, retract the boom completely and turn the vehicle
OFF.
OA0491
1
2
3