SkyTrak 10054 Operation Manual - Manual (Page 165)

General Maintenance
163 Model 10054 Rev. 11/03
5. Go to the back of the vehicle and remove the rear cover from the
back of the boom.
6. Check the measurement (4) from the top rear edge of the primary
intermediate boom (5) to the top rear edge of the secondary inter-
mediate boom (6). Measurement should be between 8.5"
(216 mm) - 11" (279 mm).
NOTE: If the measurement is less than 8.5" (216 mm) the boom may
require extensive adjustment and/or repair. Contact your local Sky Trak
Distributor.
REAR OF BOOM
OH2860
4
6
5