SkyTrak 6042 Operation Manual - Manual (Page 32)

30 Model 6042 Origin 2/04
Operation
Boom Control Lever
The boom control lever (1) is a joystick with variable motion from the center
to control the boom functions:
Boom Raise.........................move lever backward
Boom Lower ........................move lever forward
Boom Extend....................... move lever to the right
Boom Retract ...................... move lever to the left
Two boom functions can be accomplished at the same time by moving the
lever into the proper quadrant. For example: moving the lever forward and to
the left will lower and retract the boom simultaneously.
The speed of the function depends directly upon the amount of lever travel
in the corresponding direction. Increasing the engine speed will also
increase the function speed.
OH0170
OH2900
1