Mueller Pre-Fab - Manual (Page 50)

877-2-MUELLER E-4
scReW alIGnMenT (conTInUeD)
The template panel should be laid out for the proper screw locations in accordance with the
building erection drawings . Since pre-drilling will “hand” the panels, it will also be necessary to
select the end of the building from which the paneling is to begin . Before drilling the template
panel, it should be checked for proper hole locations against the building framework . Be sure there
is no excessive deflection in the purlins and girts .
2"
1 1 /
4
˝
3 /
4
˝
1 1 /
2
˝
1˝ - 1 1 /
2
˝
12˝ Lap
1˝
Dimensions subject to
variations. Check building
erection drawings.