Brocade Communications Systems Brocade Backbone DCX 8510-4 - Manual (Page 123)

Brocade DCX 8510-4 Backbone Hardware Reference Manual 103
53-1002177-05
Brocade DCX 8510-4 chassis removal and replacement
5
4. Reboot the Brocade DCX 8510-4.
Verifying correct operation of the system
Complete the following steps to verify the correct operation of the Brocade DCX 8510-4.
1. Log in to the Brocade DCX 8510-4 as admin.
switch:admin> login
login: admin
password: xxxxxxxx
switch:admin>
2. Enter the slotShow -m command and verify that all the installed cards are detected and that
their status is operational (enabled).
switch:admin> slotShow -m
Slot Blade Type ID Model Name Status
--------------------------------------------------
1 SW BLADE 97 FC16-32 ENABLED
2 SW BLADE 77 FC8-64 ENABLED
3 CORE BLADE 99 CR16-4 ENABLED
4 CP BLADE 50 CP8 ENABLED
5 CP BLADE 50 CP8 ENABLED
6 CORE BLADE 99 CR16-4 ENABLED
7 SW BLADE 96 FC16-48 ENABLED
8 SW BLADE 77 FC8-64 ENABLED
switch:admin>
3. Verify that the Brocade DCX 8510-4 is functioning correctly by entering switchShow or
switchStatusShow.
This switchShow command displays the Brocade DCX 8510-4 and port status information.
DCX-4_130:admin> switchshow
switchName: DCX-4_130
switchType: 121.3
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 130
switchId: fffc82
switchWwn: 10:00:00:05:33:03:2c:00
zoning: ON (ZONE_CONFIG_NAME)
switchBeacon: OFF
FC Router: ON
FC Router BB Fabric ID: 10
Address Mode: 0
Index Slot Port Address Media Speed State Proto
=======================================================
0 1 0 820000 id N8 Online FC F-Port
10:00:00:05:1e:f8:a0:b4