Brocade Communications Systems Brocade Backbone DCX 8510-4 - Manual (Page 70)

50 Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-05
Determining the status of a control processor blade (CP8)
4
Determining the status of a control processor blade (CP8)
Complete the following steps to determine the status of a control blade (CP8)
1. Check the LED indicators on the CP blade ( Figure 13 ). The LED patterns may temporarily
change during POST and other diagnostic tests. For information about how to interpret the LED
patterns, see
Table 4 .
2. Check the port blade status by entering slotShow and haShow.
Figure 13 identifies the CP8 blade.
FIGURE 13 Control processor blade (CP8)
Table 4 describes the CP blade LED patterns and the recommended actions for those patterns.
1 Power LED 5 Console port (Serial)
2 Status LED 6 Ethernet port (Mgmt IP)
3 USB LED 7 Ethernet port (Service IP)
4 USB port 8 Active CP LED
TABLE 4 CP blade LED descriptions
LED purpose Color Status Recommended action
Power Steady green CP blade is on. No action required.
No light (LED is off) CP blade is not on. Ensure that the blade is firmly
seated and has power.
3 4 5 6 7 8
2
1