Chassis door removal and replacement, Time and items required, Removing a chassis door – Brocade Communications Systems Brocade Backbone DCX 8510-4 User Manual
Page 80: Replacing a chassis door, Figure 18, Removal and replace
60
Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-05
Chassis door removal and replacement
5
Chassis door removal and replacement
NOTE
The chassis door must be installed to ensure the Brocade DCX 8510-4 meets EMI and other
regulatory certifications. Additionally, if ICL cables are not used, EMI plugs must be inserted in the
ICL cable ports to meet certification standards.
Time and items required
The replacement procedure for the chassis door takes less than five minutes. See
Removing a chassis door
Support the door to prevent it from falling. Pull and remove the door. It will pop off the ball studs.
FIGURE 18
Removal and replacement of the chassis door
Replacing a chassis door
Complete the following steps to reinstall the door.
1. Align the holes in the door with the ball studs on the chassis
2. Push the door into place. It will snap onto the studs.