Class1 3041-10X-00-CL1 - Sentry Governor - EXTERNAL - Manual (Page 10)

FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473
TECHNICAL DATA SHEET
PAGE
9 OF 36
DATE 6/19/2014
PRODUCT GROUP THROTTLE CONTROL P/N 3045-101-00-CL1, 3045-102-00-CL1 REV 1.02
PRODUCT SENTRY PRESSURE GOVERNOR BY AMS
4. Operation
4.1. Initialization
The SENTRY has a six (12) second power initialization cycle and during this time the display will show:
The SENTRY displays a black screen with the word
“Booting….” For 4 seconds after a power cycle.
The SENTRY shows the Sentry logo for the next 4
seconds.
The Sentry shows the version and configuration for the
last 4 seconds. The last letter of this display indicates the
configured control method of the SENTRY.
TPG-C – CFPG control method
TPG-P – PGN0 control method
TPG-A – Analog control method
TPG-S – Scania control method
TPG-D – Mercedes control method
SLAVE – Second Sentry device
(See section 6.6.2 for engine configuration).
After the initialization the SENTRY begins normal
operation.