Class1 3041-10X-00-CL1 - Sentry Governor - EXTERNAL - Manual (Page 9)

FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473
TECHNICAL DATA SHEET
PAGE
8 OF 36
DATE 6/19/2014
PRODUCT GROUP THROTTLE CONTROL P/N 3045-101-00-CL1, 3045-102-00-CL1 REV 1.02
PRODUCT SENTRY PRESSURE GOVERNOR BY AMS
3.7. Ready indicator (Twister)
The green READY indicator shows the status Sentry throttle ready interlock.
3.8. Active indicator (Twister)
The blue READY indicator indicates that the Twister is ready to control the Sentry. This is mainly used with dual-
governor applications to indicate which governor is active for user operation.
3.9. Control knob (Twister)
The control knob is the operator’s interface for controlling the Sentry’s engine speed (throttle mode) and target
pressure (pressure mode). The control knob can be configured to increase engine speed/target pressure with
clockwise or counter-clockwise rotation (see section 6.7.1).
3.10. Idle button (Twister)
The Twister’s idle button performs the same task as the idle button on the Sentry. Press and hold this button for one
second while in rpm mode or pressure mode to force the engine to ramp down to its idle position.