Pressure sensor connector, Twister connector, Technical data sheet – Class1 3041-10X-00-CL1 - Sentry Governor - EXTERNAL User Manual
Page 35
FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473
TECHNICAL DATA SHEET
PAGE
34
OF 36
DATE
6/19/2014
PRODUCT GROUP
THROTTLE CONTROL
P/N
3045-101-00-CL1, 3045-102-00-CL1
REV
1.02
PRODUCT
SENTRY PRESSURE GOVERNOR
BY
AMS
9.2. Pressure sensor connector
The pressure sensors (intake and discharge) have one connector and the following definitions apply:
Mating connector:
Packard 12078090
Mating sockets:
Packard 12089290
Recommended wire gage: 16-20 AWG
PIN
CIRCUIT
DESCRIPTION
A
SUPPLY (-)
(
INPUT
)
– pressure sensor ground
B
SUPPLY (+)
(
INPUT
)
– pressure sensor supply
(+5VDC)
C
Signal
(
OUTPUT
) – pressure sensor signal
(+0.5VDC to +4.5VDC)
9.3. Twister connector
The module has one connector and the following definitions apply:
Mating connector:
Deutsch DT06-6S GRAY
Mating sockets:
Deutsch 0462-201-16141
Gold mating sockets:
Deutsch 0462-201-1631
Recommended wire gage: 16-20 AWG
Wedge lock:
W6S
PIN
CIRCUIT
DESCRIPTION
1
SYS POWER
(INPUT) – battery voltage
(+9VDC…+32VDC)
2
SYS GROUND
(INPUT) – battery ground
3
----
Not used
4
CAN HIGH
(DATA)
– SAE J1939 CAN 2.0B, 250Kbits/s
5
CAN LOW
(DATA)
– SAE J1939 CAN 2.0B, 250Kbits/s
6
CAN SHIELD
(DATA)
– SAE J1939 CAN 2.0B, 250Kbits/s
.