Lukas traversing system - Manual (Page 20)

20
6.1.8 Setting up and adjusting the connecting rods
The distance between the load lift points must be set precisely using the connecting rods.
For this reason you have a coarse and fi ne adjustment facility.
Coarse setting of the connecting rods:
1. Remove the locking pin.
2. The coupling rod can now be pulled out and this allows coarse setting of the distance of
the rolling carriages. The hole in the coupling rod must line up with a hole in the pipe in
order to be able to insert the locking pin.
3. Insert the locking pin back into the relevant hole in the pipe.