Lukas traversing system - Manual (Page 21)

21
Fine setting of the connecting rods:
The fi ne setting is carried out at the other end of the pipe. Insert a metal rod (ø8 mm) or a
similar tool into the cross-hole of the adjusting bolt and unscrew it (anticlockwise), until the
desired distance is reached. The adjusting bolt can be unscrewed maximum 80 mm in order
to carry out the fi ne adjustment.
Connecting two rolling carriages:
Two connecting rods are always required for connecting two rolling carriages. These two
connecting rods must be set to the same length. They are inserted in the mounts provided
in the rolling carriages with the coupling rod on one side and the adjusting bolt on the other
side.