Lukas traversing system - Manual (Page 5)

5
2. Product safety
LUKAS products are developed and manufactured to ensure the best performance and
quality when used as intended.
The safety of the operator is the most important consideration in product design. Furthermore,
the operating instructions are intended to help in using LUKAS products safely.
The generally applicable legal and other binding regulations pertaining to the prevention of
accidents and protection of the environment apply and are to be complied with in addition to
the operating instructions.
The equipment must only be operated by persons with appropriate training in the safety
aspects of such equipment – otherwise, there is a danger of injury.
We would like to point out to all users that they should read carefully the operating instructions
and the instructions contained therein before they use the equipment, and that they should
carefully follow such.
We further recommend you have a qualifi ed trainer show you how to use the product.
CAUTION!
The operating instructions for the hoses, the accessories and the connected
devices must also be heeded!
Even if you have already received instruction on how to use the equipment, you should still
read through the following safety instructions again.
Please ensure that no body
parts or clothing are caught
between the visibly moving
parts (e.g. piston guard plate
and cylinder). Working under suspended
loads is not permitted where
such loads are being lifted
only using hydraulic devices.
If working under suspended
loads is unavoidable, suitable
mechanical props are also
required.
Wear protective clothing,
a safety helmet with visor,
protective footwear and gloves Inspect the device before and
after use for visible defects or
damage.
Immediately report any
changes that occur (including
changes in operating
behaviour) to the appropriate
persons/departments! If
necessary, the equipment is to
be shut down immediately and
secured! Check all lines, hoses and
screwed connections for leaks
and externally visible damage,
and repair immediately!
Escaping hydraulic fl uid can
cause injuries and fi res.
WARNING / CAUTION!
Ensure that the accessories and connected equipment are suitable for the
maximum operating pressure!