JLG 660SJ Service Manual - Manual (Page 25)

SECTION 1 - SPECIFICATIONS
3121202 – JLG Lift – 1-9
1.11 LUBRICATION AND OPERATOR
MAINTENANCE
NOTE: The following numbers correspond to those in Figure
1-1., Lubrication and Operator Maintenance Point
Location.
LUBRICATION INTERVALS ARE BASED ON MACHINE OPERATION
UNDER NORMAL CONDITIONS. FOR MACHINES USED IN MULTI-
SHIFT OPERATIONS AND/OR EXPOSED TO HOSTILE ENVIRON-
MENTS OR CONDITIONS, LUBRICATION FREQUENCIES MUST BE
INCREASED ACCORDINGLY.
1. Swing Bearing
Lube Point(s) - 2 Grease Fittings
Capacity - A/R
Lube - MPG
Interval - Every 3 months or 150 hrs of operation
Comments - Remote Access
Figure 1-1. Lubrication and Operator Maintenance Point Location
Table 1-30. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping point
of 350° F. Excellent water resistance and adhesive qual-
ities, and being of extreme pressure type.
(Timken OK 40 pounds minimum.)
EPGL Extreme Pressure Gear Lube (oil) meeting API service
classification GL-5 or MIL-Spec MIL-L-2105
HO Hydraulic Oil. API service classification GL-3, e.g.
Mobilfluid 424.
EO Engine (crankcase) Oil. Gas - API SF, SH, SG class,
MIL-L-2104. Diesel - API CC/CD class, MIL-L-2104B/
MIL-L-2104C.