AirLive A.DUO - Manual (Page 117)

5. System Configuration
AirLive A.DUO User’s Manual 110
Use DHCP Client Protocol to Get IP automatically
If you choose to use a DHCP Server to acquire an IP address for the A.DUO
automatically, enable the check box “Use the DHCP client protocol to
automatically get the IP address for this device”. Then click “Next” to go to the next
screen. As a reminder, you might loss the IP address of A.DUO when IP is
assigned dynamically.
5.1.2 Time Settings
System Configuration ->Time Settings
It is important that you set the date and time for your A.DUO so that the system log will
record the correct date and time information. We recommend you choose “Enable NTP” so
the time will be keep even after reboot. If your A.DUO is not connected to Internet, please
enter the time manually. Please remember to select your local time zone and click “Apply”
to finish.