AirLive A.DUO - Manual (Page 29)

3. Configuring the A.DUO
AirLive A.DUO User’s Manual 22
3.3.3 Command Line Interface (Telnet):
A.DUO can be managed through the command line interface (CLI). It is possible to write a
text script file, and then paste it into the CLI to execute several commands at once.
However, Telnet does not encrypt its message. Therefore, it is not secure. The default
Telnet management port is TCP port 23.
To use the CLI, please open the command line window. Then type “telnet 192.168.1.1” to
start.
When asked for password, please enter “airlive”.
To get a list of available command and their usage, please type “help” on the command
prompt.
For more information about Web Management and HTTPS, please make sure to
read through “Introduction to Web Management” in this chapter, Chapter 4,
and Chapter 5