AirLive A.DUO - Manual (Page 153)

7. Command Line Interface
AirLive A.DUO User’s Manual 146
Are you sure ? ( y/n ) : y
set <wan | lan> <webservice | ping> <enable |disable>
Purpose: enable/disable ping response or web server on the lan/wan side
Example:
Command> set lan ping enable
set lan ping already enable
set lan ip <ipaddress> sm <netmask> gw <gateway> dns <dns server>
Purpose: set LAN IP address such as IP, Subnet mask, gateway, and DNS
server
Example:
Command> set lan ip 192.168.1.1 sm 255.255.255.0 gw 192.168.1.254 dns
168.95.1.1
killall: dnsmasq: no process killed
LAN IP address : 192.168.1.1
Netmask : 255.255.255.0
Gateway : 192.168.1.254
DNS server : 168.95.1.1
set <enable | disable>
Purpose: Enable or Disable the wireless interface
Example:
Command> set enable
Radio1 enabled
set ssid <ssidname>
Purpose: Replace current main SSID name with a new one
Example:
Command> set ssid A.DUO
set ssid remotessid <remote ssidname> Repeater Mode Only
Purpose: Set the remote SSID name for repeater mode
Example: