AirLive A.DUO - Manual (Page 91)

4. Wireless and WAN Settings
AirLive A.DUO User’s Manual 84
PPPoE Server Local IP Address: 192.168.1.20
PPPoE Server Remote Starting IP: 192.168.1.100
PPPoE Server Remote End IP: 192.168.1.200
PPPoE Server One User Per Account: Disable
PPPoE Account1
Username: user1
Password: user1
Assign IP: 0.0.0.0
PPPoE Account2
Username: user2
Password: user2
Assign IP: 192.168.1.30
AirMax5
Bridge Infrastructure Mode
IP: 192.168.1.50
Router1
Gateway Mode
WAN: PPPoE, Account: user1,Password: user1
LAN IP: 192.168.100.252
Router2
Gateway Mode
WAN: PPPoE, Account: user2,Password: user2
LAN IP: 192.168.100.252
PC1 IP: DHCP
PC2 IP: DHCP
Important Characteristic about PPPoE server
If you do not specify the IP address (0.0.0.0), each account can get up to 3 IP
addresses from the Remote IP Pool.
If you specify IP address, only one IP is provided per account
The routers will get a IP with subnet mask of 255.255.255.255. As a result,
PPPoE clients (PC1 and PC2) can not see any device between the router and the
PPPoE server’s WAN port, even if they are in the same subnet. This provides
security and privacy for the network environment.
Exercise:
1. Connect all devices according to the IP address and topology on the Topology Diagram
2. Go to A.DUO and set the operation mode to “Dual Band Router”
3. From the wireless settings, please choose the “PPPoE” Server”