AirLive A.DUO - Manual (Page 152)

7. Command Line Interface
145 AirLive A.DUO User’s Manual
set telnet timeout <timeout value in minutes, 0-999, 0 for no limit>
Purpose: Set Telnet management timeout
Example:
Command> set telnet timeout 10
Changing telnet timeout may cause current telnet connections to be lost.
Are you sure ? ( y/n ) : y
Telnet session timeout: 10 minutes
set wmm qos <enable | disable>
Purpose: Enable or Disable WMM QoS
Example:
Command> set wmm qos disable
set wmm qos disable successful!
set log level <1-7>
Purpose: Set the log level
Example:
Command> set log level 7
set log level 7 successful
set client isolation <enable | disable>
Purpose: Enable or Disable client isolation / privacy seperator
Example:
Command> set client isolation disable
Set client isolation disable successful!
set operation mode <AP |repeater| client | ad-hoc |bridge_infra|
wds_bridge | wisp | router>
Purpose: set or change operation mode
Example:
Command> set operation mode AP
Operation mode is already setting!
Command> set operation mode wds_bridge
System should be reboot...