AirLive A.DUO - Manual (Page 145)

7. Command Line Interface
AirLive A.DUO User’s Manual 138
show snmp
Purpose: Show whether SNMP is enable or disabled
Example:
Command> show snmp
SNMP is enabled
show trap manager
Purpose: Show SNMP Trap manager status
Example:
Command> show trap manager
Trap Manager IP Address Status
--------------------------------------------------------------------
ailrive 192.168.1.123 enabled
show trap manager <string up to 16 characters>
Purpose: Show SNMP Trap manager status with the assigned name
Example:
Command> show trap manager airlive
Trap Manager IP Address Status
--------------------------------------------------------------------
ailrive 192.168.1.123 enabled
show radius server
Purpose: Show radius server settings
Example:
Command> show radius server
RADIUS Server State IP/Port
----------------------------------------------------------------------------------------
Primary Disabled 0.0.0.0/1812
Secondary Disabled 0.0.0.0/1812
RADIUS Server reattempt: 60 seconds