AirLive A.DUO - Manual (Page 35)

3. Configuring the A.DUO
AirLive A.DUO User’s Manual 28
3.4.2 Welcome Screen and Login
After the procedure above, the Welcome Screen will appear. Welcome Screen gives a brief
introduction of the A.DUO’s main function category. By clicking on the function category, it
will direct you to the corresponding web management menu.
Wireless Settings: Click on this part will bring you to the wireless operation mode
menu. The A.DUO’s wireless settings are different between wireless modes. Only
functions that are applicable to the wireless mode will show to simplify configuration.
For example, multiple SSID option is only workable for Access Point and AP Router
mode. Therefore, the function will only appear in these 2 modes. For this reason, the
first step to configure the A.DUO is to select the wireless mode. The router mode
specific functions are also in this menu category. For explanation of different wireless
modes, please refer to Chapter 1.
System Configuration: All non-wireless and router mode settings are in this category.
The system configurations including changing password, upload firmware, backup
configuration, settings PING watchdog, and setting management interface. The default
management timeout is 10 minutes; we recommend you should change password and
management timeout during the first time login.
Tools: Discover network status using ping, trace route tools.
Device Status: This section for monitoring the status of A.DUO. It provides information
on device status, Ethernet status, wireless status, wireless client table, and system log.
Help: This is the online help system for quick reference. We still recommend you to
read this user’s guide for more information.