AirLive A.DUO - Manual (Page 25)

3. Configuring the A.DUO
AirLive A.DUO User’s Manual 18
3
3.
2B
Configuring the
A.DUO
The A.DUO offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
A.DUO’s available management interfaces and how to get into them. Then, we will provide
the introduction on Web Management and recommended initial settings.
3.1
17B
Important Information
The following information will help you to get start quickly. However, we recommend you to
read through the entire manual before you start. Please note the password and SSID are
case sensitive.
The default IP address is: 192.168.1.1 Subnet Mask: 255.255.255.0
When using Web UI, the login as follow:
User name: admin
Password: airlive
When using telnet, the password is: airlive
When using SSH/SSH2, the login as follow:
Login : root
Password: airlive
The default radio mode for Radio 1 is 802.11a
The default radio mode for Radio 2 is 802.11g/b
The default SSID for Radio 1 is: AirLive1
The default SSID for Radio 2 is: AirLive 2
The default wireless mode is : Dual Band Router Mode
After power on, please wait for 2 minutes for A.DUO to finish boot up
Please remember to click on “Apply” for new settings to take effect
Please remember to enter the correct “Distance” parameter in wireless settings.
Failure to do so can result in poor performance.
The default country code is : United Kingdom
If you are living outside of EU, please go to Operation Mode->Setup->Regulatory
Domain to change country.