AirLive WN-200HD User Manual
Page 33
4. Monitor the Image Section
AirLive WN-200HD User’s Manual
28
MAC address:
Displays the Ethernet MAC address of the device. Note that user can not
change it.
Obtain IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to
issue IP address assignment. With this setting, the IP address is assigned
automatically. If this device can not get an IP address within limited tries, the
device will assign a default IP address, 192.168.1.100, by itself as the default
IP address.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically, then you need to
enter these network parameters manually.
Obtain DNS from DHCP:
DNS: Stands for Domain Name System.
Enable this checked box when a DHCP server is installed on the network and
provide DNS service.