AirLive WN-200HD - Manual (Page 36)

4. Monitor the Image Section
31
AirLive WN-200HD User’s Manual
Step 2: Key in security key of WEP or WPA. Then click “Submit” button to
activate wireless setting.
In case, user wants to configure wireless settings manually, please follow the
steps as below:
MAC address:
Displays the Ethernet MAC address of the WLAN card. Note that user can not
change it.
Site survey:
Click the “Refresh” button. It will refresh information window which list is the
result of a network scan. Access points with a disabled SSID Broadcast will not
appear unless the camera is associated with it. The following information is
provided:
Interface Select:
“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise
wireless”:
Choose wired or wireless mode. However, note that wired is priority.