AirLive WN-200HD User Manual
Page 54
4. Monitor the Image Section
49
AirLive WN-200HD User’s Manual
Daylight Saving:
Disable or enable the daylight saving adjustment.
4.4.3 Maintenance
Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will
reset all device’s parameters to the factory settings (including the IP address).
Factory Default (Except the network setting):
The unit is restarted and most current settings are reset to factory default val-
ues. This action will not reset the network setting.
Backup Setting:
To take a backup of all of the parameters, click this button. If necessary, it will
then be possible to return to the previous settings, if settings are changed and
there is unexpected behavior.