AirLive WN-200HD User Manual
Page 34
4. Monitor the Image Section
29
AirLive WN-200HD User’s Manual
Primary DNS and Secondary DNS:
If you do not select Obtain DNS from DHCP, then you need to enter these
parameters manually.
HTTP Port:
The device supports two HTTP ports. The first one is default port 80 and this
port is fixed. This port is very useful for Intranet usage. The second HTTP port
is changeable. Users could assign the second port number of http protocol,
and the WAN users should follow the port number to login. If the http port is not
assigned as 80, users have to add the port number in back of IP address. For
example:
Therefore, the user can access the device by either
http://xx.xx.xx.xx/
, or
http://xx.xx.xx.xx:xxxx/
to access the device.
If multiple devices are installed on the LAN and also required to be accessed
from the WAN, then the HTTP Port can be assigned as the virtual server port
mapping to support multiple devices.
Click “OK” to save and enable the setting.
4.2.2 Wireless
If your device is a wireless model, you could assign the related parameters into
wireless setting. Using a wired connection ensures greater secrecy while
making these settings. These settings should always be made in the camera
first and secondly in the wireless access point. This ensures that the device is
always accessible when making changes.
Note that this function is only available for the model with WLAN capability.