AirLive WN-200HD - Manual (Page 37)

4. Monitor the Image Section
AirLive WN-200HD User’s Manual 32
Type:
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Security mode:
Shows which type of security the network uses. The device supports three
security methods:
None
WEP
WPA_PSK/WPA2_PSK
SSID:
This is the name of the wireless network the device is configured for. The field
accepts up to 32 alphanumeric characters. The name must be exactly the
same as that used in the wireless access point, or the connection will not be
established.
Leaving this field blank means the device will attempt to access the nearest
open network.
Channel:
Chooses the wireless channel in use currently.
WEP settings:
- Authentication:
Select Open or Shared Key System Authentication, depending on the method
used by your access point. Not all access points have this option, in which
case they probably use Open System, which is sometimes known as SSID
Authentication.
- WEP Mode:
The key types available depend on the access point being used. The following
options are available:
•ASCII - In this method the string must be exactly 5 characters for 64-bit WEP
and 13 characters for 128-bit WEP.
•HEX - In this method the string must be exactly 10 hexadecimal (0-9, A-F)
characters for 64-bit WEP and 26 hexadecimal characters for 128-bit WEP.
- Web Key 1~4:
Key value of WEP.