Atop Technology SE8502-M12 User Manual - Manual (Page 29)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
25
4.2.1. LAN Settings
Operation: [Main]Æ[2 Networking]Æ[1 LAN Settings]
Select “1” from “Input choice (0~3) and enter on Networking page:” to enter LAN Settings page. The MAC
address, IP address, subnet mask, gateway address, and IP mode information will be shown (Fig. 42). User also
can set IP, Netmask, Gateway, and IP mode of LAN interfaces by enter the corresponding menus and values. For
example, enter 1 for setting the IP address on LAN interface.
Fig 35. LAN Settings by Telnet
4.2.2.
DNS Settings
Operation: [Main]Æ[2 Networking]Æ[2 DNS Settings]
Select “2” from “Input choice (0~3) and enter on Networking page:” to enter DNS Settings page.
Fill in the DNS information DNS1 or DNS2 or both according to user DNS server (Fig. 43).
Fig 36. DNS Settings by Telnet