Atop Technology SE8502-M12 User Manual - Manual (Page 40)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
36
„ Select a COM port on the list.
„ On IP Address of Server, enter SE8502-M12 IP address.
„ On Port Number, enter the TCP port number of the SE8502-M12.
„ On Server Credentials, the default is No Login Required. If the SE8502-M12 does require login by the
Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or password every time
an application tries to access the SE8502-M12.
„ Click the Configuration Wizard button and then click the Start button that shall appear on the wizard
window. This step verifies that the Virtual COM Redirector communicates with the SE8502-M12. If Log
display does not show errors, click Use Settings, return to the Control Panel
„ Settings on the Connection Protocol must match the TCP/IP protocol supported by the SE8502-M12. The
Configuration Wizard is capable of determining the correct settings.
„ On COM Port Options, the settings must match the COM port behavior expected by the PC
application. The Configuration Wizard will recommend such settings.
Fig 53. Configuration Wizard from Serial to IP tool