Atop Technology SE8502-M12 User Manual User Manual
Page 39
User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
35
Fig 51. Enable Virtual COM mode by Telnet
Running Serial to IP for program on PC
On Window Start Menu, go to\program\Serial/IP\Control panel\, The “Serial to IP for Control Panel” window shall
appear. Then select the serial port.
Fig 52. Detail setting from Serial/IP
On the right of the panel is a sample
for COM 4 settings
. On the left is the list of the COM ports that have been
selected (on Select Ports window) for use by the
Virtual COM
Redirector. Change the list by clicking the Select
Ports button.
Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect that the
selected port.
Note: COM port changes become effective immediately.
Configure Virtual COM Ports
Serial/IP COM port can be changed as follows: