Atop Technology SE8502-M12 User Manual - Manual (Page 48)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
44
The user can also select several devices at one time, and log out them at the same time by selecting Apply
for all selected devices.
B3.3.3 Change Password
This function is applied to modifying the password for logging in any network device, but can only be
realized after a successful log-in, shown as the figure below:
The user can also select several devices at one time, and modify their pins at the same time by selecting
Apply for all selected devices.
B3.4 Configuration
This function is applied to the configuring, import and export of work parameters for any network device,
and here are mainly supplied with: ‘Network …’, ‘COM Port…’, ‘Locate’, ‘Reset’, ‘Erase Flash’, ‘Import
Setting…’, ‘Export Setting…’, ‘Virtual COM…’, ‘Config by IE’ and ‘Options’, and some other application
functions. The user can carry out a configuration operating through
menu or by clicking the corresponded button on the toolbar, shown as the figure below: