Atop Technology SE8502-M12 User Manual - Manual (Page 52)

User manual Version 1.1
SE8502-M12 IP68 Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved
48
The user can also select several devices at one time, and lead the parameter information of a standard
parameter file into all the selected devices by selecting Apply for all selected devices have same model.
B3.4.7 Export Setting…
If a network has a large number of devices which are used for a same purpose, it would be very
complicated to carry out the parameter configuration for each of the devices in the network one by one,
while the user can save the parameter information of a standard device into a parameter file through the
submenu option Export setting… or clicking the Export setting… button on the toolbar, thus the
parameter information can be led in over again from this parameter file when the user is to carry out a
configuration for any other device, shown as the figure below: