Auto Meter 6002 - Manual (Page 44)

Chapter 5. Installing the Display System
38 Street Dash Users Guide
Power supply to Trackside beacon
The beacon operates from a 12v DC supply. A sealed lead-acid
battery with a minimum rating of 2.5 Amp/hour is recommended.
This provides about 15 hours of operation.
The condition of the battery is indicated by the color of the LED
indicator on the front panel of the unit:
1. Green: The voltage is, at present, adequate for use
2. Red: The voltage is too low (replace the battery).
3. No Color: Battery exhausted or disconnected.
Wiring harness
The Display Module, the sensors, switches and external lights for
your Display System are connected together by means of the
wiring harness supplied with the system.
The wiring harness can be fitted after the Display Module and all
the sensors and switches have been installed.
This harness has been designed so that the various branches are
long enough for most applications. Occasionally, an individual
branch may need to be extended significantly. Contact Auto
Meter or your Auto Meter dealer to purchase extension cables.
Do not shorten the supplied wire harness. It is recommended that
additional length is coiled and secured away from moving parts
and high heat sources.
Extender wires for connecting the air temperature and wheel
speed sensors to the wiring harness are available in lengths of
either 2’, 4’ or 6’.
Model No. Length
9524 2’
9525 4’
9526 6’