Auto Meter 6002 - Manual (Page 9)

Chapter1. Introducing the Display Systems
Street Dash Users Guide 3
How to Use this Manual
Auto Meter recommends that you unpack and connect the
components in the system before you install it in your vehicle.
This will enable you to familiarize yourself with operating the
display and configuring it for the vehicle in which you intend to
install it.
This manual starts by taking you through the process of setting
up the system before installation, operating the digital display,
configuring the system, setting the alarm values and installing it
in the vehicle. By the end of Chapter 2, you will have set up the
system so that you will be assured that it is functioning normally.
You can then read Chapter 3 and practice using its functions.
Chapter 4 takes you through configuring it for your vehicle.
Chapter 5 explains how to install it in the vehicle. Chapter 6
provides a set of trouble-shooting guidelines.
A full size template for the dashboard cut-out for the Street Dash
Display is provided in Appendix A along with a dimensional
drawing on page 26. There is a schematic diagram of the wiring
harness in Appendix B.
System Overview