Auto Meter 6002 - Manual (Page 49)

Chapter 6. Troubleshooting
Street Dash Users Guide 43
No. Symptom Possible Cause Remedy Notes
13 Switch 1: Show
peak values does
not work Switch 1 faulty Replace switch Disconnect
switch and
short its
leads. If
display
changes,
replace
Switch 1.
Otherwise
check wiring.
Faulty switch wiring Check switch
wiring for correct
continuity Pin K to red
S1 wire less
than 1.0
Ohm and Pin
K to Pin H
(ground)
greater than
1M Ohms)
14 Switch 2: Show last
alarm function does
not work Switch 2 faulty
Replace switch
Disconnect
switch and
short its
leads. If
display
changes,
replace
Switch 2.
Otherwise
check wiring.
Faulty switch wiring Check switch
wiring for correct
continuity.
Pin L to red
S2 wire less
than 1.0
Ohm and Pin
L to Pin H
(ground)
greater than
1M Ohms)
Switch 3 faulty
Replace switch
Disconnect
switch and
short its
leads. If
display
changes,
replace
Switch 3.
Otherwise
check wiring. 15 Switch 3: Change
display layer
function does not
work
Faulty switch wiring Check switch
wiring for correct
continuity.
Pin U to
orange S3
wire less
than 1.0
Ohm and Pin
U to Pin H
(ground)
greater than
1M Ohms)