Installation, Instructions – Autoquip FREIGHTLIFT FL4M User Manual
Page 73
Advertising
73
13. After installing these drive chain sensing switches, they should be tested to make
sure they are adjusted and set correctly. A qualified electrician should, while
referencing the lift’s electrical schematic, test the electrical continuity of each drive
chain sensing switch inside the lift’s motor control panel to make sure that the
contacts in the switch are in the closed condition when in the running position with
an unloaded carriage.
Should you have any questions or need assistance please call Autoquip
Product Support at 888-811-9876.
INSTALLATION
INSTRUCTIONS
Advertising