Safety practices – Autoquip FREIGHTLIFT FL4M User Manual
Page 9
9
WARNING
!
Slack chains require factory help! Do not attempt to repair slack chain
conditions alone! Always contact the local representative or call the
Autoquip Service Department at 888-811-9876.
WARNING
!
Never run the unit with the gates or doors open! Do not operate unit
with doors open or with the interlocks “defeated” (bypassed)! Serious
injury or death could result.
WARNING
!
Never go under platform carriage! Use a long-handled broom or similar
implement to remove debris that may accumulate.
WARNING
!
Secure unit before making static inspections! Make sure the platform is
fully lowered and the power is turned off (disconnected at the safety
disconnect switch) before performing static inspections. Place signs at all
gates, doors, controls, etc. indicating the system is temporarily out of
service for routine maintenance per OSHA Lock-Out, Tag-Out procedures.
WARNING
!
Close all gates when not in use! Never leave the FREIGHTLIFT
unattended with gates left open.
SAFETY PRACTICES