Autoquip FREIGHTLIFT FL4M - Manual (Page 90)

90
DANGER !
To avoid personal injury or death, the procedures described in this section
should only be performed by qualified service personnel.
WARNING !
Never operate the lift by “manualling” the electrical controls (using the
contactors located inside the control panel). All safety devices are by-
passed in this mode of operation and lift damage or severe personal injury
could occur.
ADJUSTING LEVEL & OVER-TRAVEL LIMIT SWITCHES
To ensure proper setting and performance of all Level Limit Switches and Over-Travel
Limit Switch, follow the procedure set forth in Paragraph Kof the “Installation” section.
NOTE: Should you have any questions or need assistance please call Autoquip
Customer Service (888-811-9876).
ADJUSTING SLACK CHAIN SENSING SWITCHES
WARNING !
Slack chains require factory help! Do not attempt to repair slack chain
conditions alone! Always contact the local representative or call the
Autoquip Service Department at 888-811-9876.
To ensure proper setting and performance of all Drive Chain & Lifting Chain Sensing
Switches, follow the procedure set forth in Paragraph L of the “Installation” section.
GENERAL MAINTENANCE