DATOptic ARC-1680 Series - Manual (Page 124)

WEB BROWSER-BASED CONFIGURATION
124
To activate the incomplete the RAID set, click on the “Activate
Raid Set” link. A “Select The RAID SET To Activate” screen is
displayed showing all RAID sets existing on the current controller.
Click the RAID set number to activate in the select column.
Click on the “Submit” button on the screen to activate the RAID
set that had a disk removed (or failed) in the power off state. The
SAS RAID controller will continue to work in degraded mode.
6.5.5 Create Hot Spare
When you choose the “Create Hot Spare” option in the “Raid Set
Function”, all unused physical devices connected to the current
controller appear. Select the target disk by clicking on the ap-
propriate check box. Click the “Confirm The Operation” check
box and click the “Submit” button in the screen to create the hot
spares. The “Create Hot Spare” option gives you the ability to
define a global hot spare.
6.5.6 Delete Hot Spare
Select the target hot spare disk to delete by clicking on the ap-
propriate check box. Click the “Confirm The Operation” check
box and click the “Submit” button on the screen to delete the hot
spares.