DATOptic ARC-1680 Series - Manual (Page 84)

BIOS CONFIGURATION
84
"Internal" in the setup manual then restart the system to set the
active channel CH5-8 on the internal port.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
SATA NCQ Support
HDD Read Ahead Cache
Volume Data Read Ahead
Hdd Queue Depth Setting
Empty HDD Slot LED
Controller Fan Detection
SAS Mux Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
SAS Mux Setting
SAS Mux Setting
Auto
Internal
External
Auto
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
SATA NCQ Support
HDD Read Ahead Cache
Volume Data Read Ahead
Hdd Queue Depth Setting
Empty HDD Slot LED
Controller Fan Detection
SAS Mux Setting
Auto Activate Raid Set
Disk Write Cache Mode
Capacity Truncation
Auto Activate Raid Set
Auto Activate Raid When Power on
Enabled
Disabled
3.7.5.13 Auto Activate Raid Set
When some of the disk drives are removed in power off state
or boot up stage, the RAID set state will change to “Incomplete
State”. But if a user wants to automatically continue to work
while the SAS RAID controller is powered on, then user can set
the “Auto Activate Raid Set” option to “Enabled”. The RAID state
will change to “Degraded Mode” while it powers on.