DATOptic ARC-1680 Series - Manual (Page 94)

BIOS CONFIGURATION
94
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
View System Function
Time Device Event Type ElapseTime Errors
2007-1-1 12:00:00 ARC-1680-VO#00 Raid Powered On
2007-1-1 12:00:00 H/W Monitor Raid Powered On
2007-1-1 12:00:00 H/W Monitor Raid Powered On
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Clear Event Buffer
Clear Event Buffer?
No
Yes
3.7.8 View System Events
To view the SAS RAID controller’s system events information,
move the cursor bar to the main menu and select the “View
System Events” link, then press the Enter key. The SAS RAID
controller’s events screen appear.
Choose this option to view the system events information: Timer,
Device, Event type, Elapsed Time, and Errors. The RAID system
does not have a build-in real time clock. The time information is
the relative time from the SAS RAID controller powered on.
3.7.9 Clear Events Buffer
Use this feature to clear the entire events buffer.