Appendix, Appendix c, Snmp operation & installation – DATOptic ARC-1680 Series User Manual

Page 155

Advertising
background image

155

APPENDIX

Appendix C

SNMP Operation & Installation

Overview

The McRAID storage manager includes a firmware-embedded Sim-

ple Network Management Protocol (SNMP) agent and SNMP Exten-

sion Agent for the SAS RAID controller. An SNMP-based manage-

ment application (also known as an SNMP manager) can monitor

the disk array. An example of An SNMP management application is

Hewlett-Packard’s Open View. The SNMP extension agent can be

used to augment the SAS RAID controller if you are already run-

ning an SNMP management application at your site.

SNMP Definition

SNMP, an IP-based protocol, has a set of commands for getting the

status of target devices. The SNMP management platform is called

the SNMP manager, and the managed devices have the SNMP

agent loaded. Management data is organized in a hierarchical data

structure called the Management Information Base (MIB). These

MIBs are defined and sanctioned by various industry associa-

tions. The objective is for all vendors to create products in compli-

ance with these MIBs so that inter-vendor interoperability can be

achieved. If a vendor wishes to include additional device informa-

tion that is not specified in a standard MIB, then that is usually

done through MIB extensions.

Advertising