DATOptic ARC-1680 Series - Manual (Page 64)

BIOS CONFIGURATION
64
• No
It keeps the volume size with max. 2TB limitation.
• LBA 64
This option uses 16 bytes CDB instead of 10 bytes. The maximum
volume capacity up to 512TB.
This option works on different OS which supports 16 bytes CDB.
Such as:
Windows 2003 with SP1
Linux kernel 2.6.x or latter
• Use 4K Block
It change the sector size from default 512 Bytes to 4k Bytes. the
maximum volume capacity up to 16TB. This option works under
Windows platform only. And it can not be converted to “Dynamic
Disk”, because 4k sector size is not a standard format.
For more details, please download pdf file from ftp://ftp.
areca.com.tw/RaidCards/Documents/Manual_Spec/
Over2TB_050721.zip
• Stripe Size
This parameter sets the size of segment written to each disk
in a RAID 0, 1, 10, 5, 6, 50 or 60 logical drive. You can set the
stripe size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, 128 KB, 256 KB,
512 KB, or 1M.
If volume capacity will exceed 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Total 5 Drives
Raid 0
Raid 1 + 0
Raid 1 + 0 + Spare
Raid 3
Raid 5
Raid 3 + Spare
Raid 5 + Spare
Raid 6
Raid 6 + Spare
Raid 0
Greater Two TB Volume Support
No
Use 64bit LBA
Use 4K Block
No