DATOptic ARC-1680 Series - Manual (Page 48)

BIOS CONFIGURATION
48
3.7 Main Menu
The main menu shows all functions that are available for executing
actions, which is accomplished by clicking on the appropriate link.
Note:
The manufacture default password is set to 0000; this
password can be modified by selecting “Change Password”
in the “Raid System Function” section.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Verify Password
10 Choosing Foreground (Fast Completion) Press Enter key to define fast
initialization or selected the Background (Instant Available) or No Init
(To Rescue Volume). In the “Background Initialization”, the initialization
proceeds as a background task, the volume set is fully accessible for
system reads and writes. The operating system can instantly access
to the newly created arrays without requiring a reboot and waiting the
initialization complete. In “Foreground Initialization”, the initialization
proceeds must be completed before the volume set ready for system
accesses. In “No Init”, there is no initialization on this volume.
11 If space remains in the RAID set, the next volume set can be configured.
Repeat steps 8 to 10 to configure another volume set.