DATOptic ARC-1680 Series - Manual (Page 141)

141
WEB BROWSER-BASED CONFIGURATION
IP address must be entered manually at each computer system.
DHCP lets a network administrator supervise and distribute IP
addresses from a central point. The purpose of DHCP is to provide
the automatic (dynamic) allocation of IP client configurations for
a specific time period (called a lease period) and to eliminate the
work necessary to administer a large IP network.
To configure the RAID controller Ethernet port, move the cursor
bar to the main menu and click on the “System Controls” link.
The “System Controls” menu will show all items. Move the cursor
bar to the “Ethernet Configuration” item, then press Enter key to
select the desired function.
6.8.4 Alert By Mail Configuration
To configure the RAID controller e-mail function, move the cur-
sor bar to the main menu and click on the “System Controls”
link. The “System Controls” menu will show all items. Move the
cursor bar to the “Alert By Mail Configuration” item, then select
the desired function. This function can only be set via web-based
configuration.
The firmware contains a SMTP manager monitoring all system
events. Single or multiple user notifications can be sent via “Plain
English” e-mails with no software required. (Please refer to sec-
tion 5.6 ArcHttp Configuration of SMTP Sever Configuration, Mail
Address Configuration and Event Notification Configuration)
Note:
If you configure the HTTP Port Number to 0, the HTTP
console will be closed.