DATOptic ARC-1680 Series - Manual (Page 72)

BIOS CONFIGURATION
72
3.7.3.6 Stop Volume Set Check
Use this option to stop all of the “Check Volume Set” operations.
3.7.3.7 Display Volume Set Info.
To display volume set information, move the cursor bar to the
desired volume set number and then press the Enter key. The
“Volume Set Information” screen will be shown. You can only
view the information of this volume set in this screen, but can
not modify it.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Function
Create Volume Set
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Select Volume To Display
ARC-1680-VOL#00(Raid Set #00)
The Volume Set Information
Volume Set Name : ARC-1680-VOL # 00
Raid Set Name : Raid Set # 00
Volume Capacity : 1200.0GB
Volume State : Initialize
SCSI CH/Id/Lun : 0/0/0
RAID Level : 5
Stripe Size : 64K
Block Size : 512 Bytes
Member Disk : 4
Cache Attribute : Write-Back
Tag Queuing : Enabled
3.7.4 Physical Drives
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Physical Drives