Elkhart Brass Sidewinder 7161 EXM UHP - Manual (Page 9)

EXM UHP– Installation Instructions
(Step 1 – Mount and Wire All System Components)
9
C. Nozzles –
 Ensure there is a gasket inside the nozzle
swivel.
 Hand tighten the nozzle onto the monitor
discharge.
 Loosen the swivel to reposition the nozzle
with the locking lever on the underside of
the nozzle as shown.
 Tighten the nozzle swivel with a spanner wrench.
 Supply power to the nozzle by connecting the
monitor and nozzle two-way connectors.
O-ring & Gasket Location
Two-Way Connector