ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 37)

Gold Hawk Installation Guide Installation
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
37
Figure 7: Brushed Motor Power Connection Diagram
Figure 8: DC Brushed Motor Power Connection Diagram
4.7.2.2. Main Power
Pin Function Cable Pin Positions
VP+ Pos. Power input Power
PR Power return Power
PE Protective earth Power
Connector Type: 2 mm pitch 0.51 mm sq
Connect the VP+, PR and PE pins on the Gold Hawk in the manner described in Section 4.5
“Integrating the Gold Hawk on a PCB”.
Note: The source of the Main Power Supply must be isolated.